Cockpit GTR S8 ELITE FORCE Red

The GTR S8 ELITE FORCE simulation Cockpit combines the brand’s latest advances in simracing technology with a timeless design inspired by the world of racing. Its high-density carbon steel tubular structure with a 48 mm diameter guarantees optimum rigidity, and the mounting plates ensure full compatibility with solutions from leading brands such as Fanatec®, Moza®, Thrustmaster®, Logitech®, Turtle Beach® or Asetek®. Featuring a wide range of adjustment options, this cockpit offers an ergonomic cockpit suitable for a variety of driving modes, including GT, Drift, F1 and Rally.

Key Features

✅ Full Force kit included for optimum rigidity and an aggressive look.
✅ Genuine suede-covered fibreglass bucket seat, mounted on slides, suitable for all body sizes from 1.50 m to over 2.10 m, with a load capacity of up to 150 kg.
✅ Laser-cut brand logo on bucket brackets.
✅ Reinforced pedal bracket allowing LoadCell pedals to be fitted, even flat.
✅ Multiple settings available, quick adjustment thanks to the use of tightening knobs
✅ Height and tilt adjustable steering wheel support compatible with Force Feedback Direct Drive and Courroie technologies.
✅ Nickel steel screws and high quality threaded inserts from the automotive industry.
✅ Stiffening angles at the front and rear of the chassis with oblong grooves 6 mm in diameter, allowing the installation of accessories made using 3D printing or other methods, in a Do It Yourself (DIY) spirit.
✅ Chassis fitted with eight welded nuts that can be used to secure either the included Oplite swivel feet or the optional CASTOR WHEEL GTR S8 high-performance wheel kit.
✅ The latest technological advances open up new opportunities for flight simulation with the addition of the optional SIMRACING & FLIGHTSIM HOLDER.

Technical specifications

Chassis:
• 48mm x 2mm thick Tubular Structure
• Full Force Kit included
• High-strength Glossy Black & Red paint for a high quality finish
Flying support:
• 30° up/down adjustment
• 30° up/down
Pedal support:
• Depth Adjustment Allows you to adjust the 200mm front/rear position and the 0° to +30° tilt, to adapt to your morphology
Bucket seat:
• Adjustable depth
• Adjustable height and angle front/rear from -6° to +6° and +5/-5cm
• Fiberglass reinforced (GRP) polyester shell, satin black finish.
• 32Kg/m3 Suede and High Density Foam
• 5 Harness Passes / 3 or 4 Point Compatible Harnesses
• Slide fixings for 220mm fit
Product compatibility: 100% compatible with Fanatec®, Moza®, Thrustmaster®*, Logitech®, Turtle Beach® or Asetek brand flywheels and pedals®
*All Thrusmaster products except T150 and TMX